Walk-in configurator
Design your walk-in in 3D, then send it to Titan.
Set the size, shape, panels, doors and refrigeration in a few minutes. Download your design as a one-page PDF and a Titan specialist will call you with pricing within one business day.
How it works
- Start with a working box. The configurator opens on a 10 × 8 × 8 ft cooler with a door, refrigeration and lighting already in place. Switch it to a freezer or combo and resize it to your space.
- Dial in the details. Shape, panels, finish, floor, doors, refrigeration and the inside layout. Optional steps keep sensible defaults, so skip anything you're unsure of.
- Send it to Titan. Enter your name and email to download a spec sheet. Our team receives the same design and follows up within one business day.
Before you measure
- Footprint and ceiling. Measure the floor area and ceiling height where the walk-in will go, and leave a few inches of clearance on each side and above.
- Cooler or freezer. Coolers run around 39 °F (4 °C), freezers around 0 °F (−18 °C). A combo puts both behind one shell with a shared partition.
- Door clearance. Swing doors need open floor in front of them. Sliding, bi-part and roll-up doors save that space.
- Where the heat goes. A self-contained unit sits on the box. A remote system moves the heat and noise outside or onto the roof.
Configurator questions
Does the configurator show a price?
No. Every Titan walk-in is built to the site, so pricing depends on access, electrical and the equipment chosen. Send your design and we'll quote it within one business day.
What happens after I send my design?
A Titan specialist reviews the layout and the refrigeration sizing, then calls to confirm details and pricing. If needed, we book a site measure.
Can I save my design and finish later?
Yes. Save Draft keeps your design in this browser and copies a link you can reopen later or share with your team.
Do I need to know refrigeration to use it?
No. The configurator estimates the heat load and suggests how many evaporators you need. Our team confirms the final equipment.
Can I build a cooler and freezer in one box?
Yes. Choose Cooler + Freezer in Setup and a partition wall splits the box. Move it in the Interior step to size each room.
How accurate is the heat load?
It's a planning estimate based on the size, panels, doors and site temperatures you enter. Final equipment sizing is done by our team before anything is ordered.
Prefer to talk it through? Call (416) 896-7153.