Restaurant Walk-In Coolers in Toronto, Built Around Service Hours.
Titan Walk-In Coolers designs, builds, and installs walk-in coolers and freezers for Toronto restaurants — measured during prep, installed around service, and running before your next dinner rush. From King West patios to Ossington tasting rooms and the Kensington Market grill line, downtown kitchens run tight — your cooler has to keep up.
Every Kind of Toronto Kitchen.
A 40-seat café and a 300-cover banquet kitchen need very different cold storage. We build for the full range of Toronto's food scene — chef-driven bistros, high-volume downtown kitchens, cocktail bars, and patio restaurants.
Full-Service Restaurants
The most common Toronto build: an 8×10 or 10×12 cooler for daily produce, dairy, and protein, often paired with a smaller freezer sharing a wall to save floor space and energy.
Cafés, Bakeries & QSR
Compact 6×8 boxes tucked into tight back-of-house corridors — panels that fit through standard doorways and assemble in place without wet trades.
Bars & Pubs
Keg-ready coolers with draft-line penetrations, reinforced floors for stacked kegs, and door placement that keeps the change-over out of your service path.
Banquet & Catering
High-capacity walk-ins with sheet-pan rack staging room, built for operations that swing from quiet weekdays to fully booked weekends.
Ghost & Commissary Kitchens
Multi-tenant cold storage with lockable sections and layouts matched to shared-kitchen workflow — a growing slice of Toronto's food economy.
Retrofits & Replacements
Aging cooler in an operating restaurant? We replace panels, doors, and refrigeration — or swap the whole unit — working around your service hours.
What Size Walk-In Does Your Toronto Restaurant Need?
Seat count and delivery frequency drive the answer. This is the guide we quote from — a free site survey confirms the fit against your actual menu and volumes.
| Cooler Size | Restaurant Fit | Holds | On-Site Install |
|---|---|---|---|
| 6×8 (48 sq ft) | Cafés, bakeries, small QSR — up to ~40 seats | 2–3 days of prep stock | 1 day |
| 8×10 (80 sq ft) | Mid-size full-service — 80–120 seats | 3–4 days of produce, dairy, protein | 1–2 days |
| 10×12 (120 sq ft) | Busy full-service and pubs — 120–150 seats | Full weekly cycle with staging room | 1–2 days |
| 12×16+ (192+ sq ft) | Banquet, catering, high-volume kitchens | Bulk cases + rack staging; combo cooler/freezer builds | 2–3 days |
Cooler holds 35°F / Freezer holds 0°F · Combo units share a panel wall · All sizes custom-cut to your floor plan
Installed Without Going Dark.
A restaurant can't close for a week to get a cooler. Our cam-lock panels assemble inside finished kitchens without wet trades, so the schedule bends around your covers, not the other way around.
Site Survey
We measure during your prep window — space, access route, electrical, drainage. Fixed itemized quote within 48 hours.
Fabrication
Panels cut and refrigeration bench-tested in our Mississauga shop while your kitchen runs untouched.
Install
Delivery, assembly, refrigeration hookup, electrical tie-in — scheduled overnight or around service where the kitchen is operating.
Commissioning
Pull-down tested, temperature verified, staff walkthrough. You stock it the same day.
The Dining Rooms We Keep Cold.
From King West to Leslieville, we install and service restaurant walk-ins across all of Toronto — 25 min from our shop, so site visits book within days.
Looking for cold storage beyond restaurants — grocery, food processing, or warehouse scale? See our full Toronto walk-in coolers page, or explore custom builds and walk-in freezers. Running a kitchen just outside the core? We also build for restaurants in North York and Scarborough.
Titan Walk-In Coolers builds commercial refrigeration only and does not supply residential cold rooms or equipment without installation.
Toronto Restaurant Cooler Questions.
A standard 6×8 restaurant walk-in cooler in Toronto typically starts in the low five figures turnkey installed, and a 10×12 cooler/freezer combo runs in the mid-five-figure range. Size, refrigeration package, and site access set the final number, so every quote follows a free site survey — and the quote we give is fixed and itemized, with no vague line items.
Yes — most Toronto restaurant installs happen while the kitchen keeps operating. Our cam-lock panels fit through standard doorways and assemble without wet trades, so we schedule delivery and assembly overnight or between services. The working-around-your-hours plan is part of every quote.
Standard restaurant builds run 2–4 weeks from deposit to a cold, commissioned cooler, with the on-site install itself taking 1–2 days. If your Toronto opening date is tight, tell us — accelerated fabrication is often possible, and being 25 min away means the site survey books within days, not weeks.
Most full-service kitchens land on a walk-in cooler for daily produce, dairy, and protein plus a smaller freezer for backup stock — often built as a combo unit sharing a panel wall to save floor space and energy. We walk through your menu and delivery rhythm at the site survey and spec what your volumes actually support, not the biggest box we can sell.
Yes — every Titan build uses NSF-certified components, CSA-approved electrical, and ETL-listed refrigeration, meeting Ontario food-premises code as enforced by Toronto's public health unit. We provide the supporting certification documentation with your install package for inspections and permitting.
Yes — panels are cut to your floor plan and carried in through standard doorways, so tight corridors, basements, and older buildings are routine work. In Toronto that regularly means century-old Victorian storefronts along Queen and Dundas with basement prep areas and laneway-only rear access — we plan the carry route and any curbside loading permit before install day. The access route gets measured at the site survey, so there are no surprises on install day.
What Restaurant Owners Say.
"New walk-in install at our restaurant — smooth process and a great result. On time, professional, and the unit has been running perfectly since day one."
"Full cooler and freezer build for our new location. Clear on timelines, delivered exactly what was quoted, and walked our staff through the controls before leaving."
"Used Titan for our restaurant build — on time, no headaches, works perfectly."
Google rating: 5.0 / 5 · 29 verified reviews
- Business
- Titan Walk-In Coolers
- Address
- Unit A - 3279 Lenworth Dr, Mississauga, ON L4X 2G6
- Phone
- (416) 896-7153
- info@titanwalkincoolers.ca
- Hours
- Mon–Fri, 11am–8pm · Shop visits by appointment
- Emergency Line
- 24 hours / 7 days
- Serving
- Toronto and the GTA
Your Next Service Doesn't Wait. Neither Do We.
Free site survey at your Toronto restaurant, fixed itemized quote within 48 hours, and a cooler running before you need it. Call direct or book online — we respond the same business day.